Flexible Arduino
This screen shot is an all-layer view of my TLC5940 painter board. The 1st draft featured two TLC5940s, but I decided it made the board too large. Instead, I wanted the ability to mount the painter boards around the LED’s shadow box. This should make routing all the wires much easier.
This pattern is called Row Your Boat. As one of the strips starts to get brighter, a nearby strip will join in the fading. After completing a fade cycle, they start switching colors. There is a random strobe thrown in there as well. The first 10 seconds are with a diffuser (piece of paper), the [...]
In an attempt to find a free set of schematic and PCB tools for hobby work, I looked back at gEDA. The last time I used it was when the project first started, years and years ago. I was happy to see that OS X had a set of fink packages for the gEDA suite. [...]
Initially I tried to get a LCD screen working with my Illuminato based Arduino. After a couple of attempts I realized two things: 1. The Iluminato is not ready for prime time. and 2. I burned out the LCD. So I decided to move on to the LCD strips I have from Sparkfun.
